CITS Electrician Safety Practices Theory and MCQ Question Bharat skills and Nimi Question Alls
CITS Electrician All MCQ Question
Safety and safety rules related Questions for CITS Exams
CITS electrician के लिए सबसे पहले हमने आपके लिए सभी प्रश्नों को यहाँ लिखा है और इसके बाद आप इन प्रश्नों को पड कर टेस्ट भी दे सकते है | और यह जो प्रश्न रहेगे सभी प्रश्न Bharat skills और Nimi से रहने वाले है |
इसमे जो प्रश्न रहेगे वह Safety Practices / precaution से रहने वाले है आप सभी जानते होंगे यह chapter -1 है ,जिसमे टोटल 24 प्रश्न रहने वाले है अगर आपने इन सभी प्रश्नों को सही से पड़ा और प्रक्टिस की तो आप exam में आए हुए सभी प्रश्नों को अच्छी तरह से हल कर पायेगे |
इस QUIZ को हमने तीन भागो में बाटा है, Level -1 , Level -2 And Level -3
और अंत में जो टेस्ट लिया गया है वह सभी Level का एक साथ लिया है तो आप पहले अच्छी तरह से इन सभी प्रश्नों की पड़े फिर टेस्ट देना शुरू करे अगर आप Direct Test देना चाहते है तो आप सीधे भी टेस्ट दे सकते है
CITS Electrician Safety Practices Question Level -1
Q.1 What is smothering in extinguishing of fire?
A Adding the fuel element to the fire
B Removing the fuel element from the fire
C Using of water to lower the temperature
D Isolating the fire from the supply of oxygen
Answer.
D .Isolating the fire from the supply of oxygen
Q.2 What is the name of the tool?
A Wire stripper
B Crimping tool
C Combination pliers
D Diagonal cutting pliers
Answer.
D .Diagonal cutting pliers
Q.3 Name the part marked ‘X’ of the file?
A Edge
B Heel
C Tang
D Shoulder
Answer.
B. Heel
Q.4 What is the name of tool?
A Claw hammer
B Ball pein hammer
C Cross pein hammer
D Straight pein hammer
Answer.
A .Claw hammer
Q.5 What is the name of tool?
A Claw hammer
B Tacks hammer
C Cross pein hammer
D Straight pein hammer
Answer.
B. Tacks hammer
CITS Electrician Safety Practices Question Level -2
Q.1 Which is the correct sequence of operation to be performed when using the fire extinguisher?
A Pull, Aim, Squeeze, Sweep
B Pull, Aim, Sweep, Squeeze
C Push, Arrange, Squeeze, Sweep
D Push, Arrange, Sweep, Sequence
Answer.
A .Pull, Aim, Squeeze, Sweep
Q.2 Which plier is used for making wire hooks and loops?
A Flat nose plier
B Long nose plier
C Round nose plier
D Diagonal cutting plier
Answer.
C Round nose plier
Q.3 What is the use of pincer?
A Twisting the flexible wires
B Cutting small diameter of wires
C Extracting the pin nails from the wood
D Holding small objects, where finger cannot reach
Answer.
C. Extracting the pin nails from the wood
Q.4 Which type of fire extinguisher is used for fire on electrical equipment?
A Halon type
B Foam type
C Gas cartridge type
D Stored pressure type
Answer.
A. Halon type
Q.5 What is starving in extinguishing of fire?
A Adding fuel to the fire
B Using water to cool the fire
C Removing fuel element from the fire
D Preventing oxygen supply to the fire
Answer.
C. Removing fuel element from the fire
Q.6 Which artificial respiriation method is to be performed to the victim with injuries on the chest and belly?
A Schafer’s method
B Mouth to mouth method
C Mouth to nose method
D Nelson’s arm-lift back pressure method
Answer.
D. Nelson’s arm-lift back pressure method
Q.7 What is the use of this tool?
A Holding the hot substances
B Cutting and twisting the wires
C Extracting nails from the wood
D Loosening and tightening the bolts and nuts
Answer.
C. Extracting nails from the wood
Q.8 How will you diagonise the victim is suffering under cardiac arrest?
A Gets pain in spinal guard
B Mouth will be closed tightly
C Heavy swelling on his stomach
D Appears blue colour around his lips
Answer.
D. Appears blue colour around his lips
Q.9 What is the first-aid to be given to stop the bleeding of the victim?
A Applying ointment
B Keep the injured portion upward
C Covering the wound portion by dressing
D Applying pressure over the injured portion
Answer.
D. Applying pressure over the injured portion
Q.10 Which condition of the victim, the mouth to nose method can be applied ?
A If the victim mouth is fully open
B When the victim has burns/injury in the back
C If the victim has injuries in the chest and belly
D When the victim's mouth has a blockage of air ways
Answer.
D. When the victim’s mouth has a blockage of air ways
Q.11 What is the use of round nose plier ?
A Holding flat objects
B Holding small objects
C Making hooks and loops on wires
D Cutting of wires for smaller diameter
Answer.
C. Making hooks and loops on wires
Q.12 Which type of fire is having risk of explosion and sudden outbreak ?
A Fire on wood
B Fire on cloth
C Fire on metals
D Fire on liquid gas
Answer.
D. Fire on liquid gas
CITS Electrician Safety Practices Question Level -3
Q.1 What immediate action should be taken to rescue the victim, if he is still in contact with the electrical power supply?
A Pull or push him from the contact by hand
B Inform your authority about this electric shock
C Call someone for helping to remove him from contact
D Break the contact by switching OFF the power supply
Answer
D .Break the contact by switching OFF the power supply
Q.2 How can the fire on wood (or) clothes can be extinguished by using water?
A It can be passed to the middle of the fire
B It can be passed around the fire fast and then to middle
C It must be sprayed on the top of the fire and then to its base
D It must be sprayed on the base of the fire and gradually move upwards
Answer.
D. It must be sprayed on the base of the fire and gradually move upwards
Q.3 What will happen to the fireman, if he will change operation sequence of ‘PASS’ ?
A Fire extinguisher will not function
B Fire may be spreaded around the place
C Fire extinguisher get exploded and damaged
D Fire may spread over the body of the fireman
Answer.
C. Fire extinguisher get exploded and damaged
Q. 4 How will you rescue the electric shocked victim, if you are not able to switch ‘OFF’ the power?
A Pullout by using insulating material
B Call somebody to switch OFF the main'
C Pull (or) push the victim by using your hand
D Report this accident to your intermediate authorities
Answer.
A. Pullout by using insulating material
Q.5 What will happen if the wrong extinguishing agent is used?
A It will increase the heat of fire
B It blocks the spraying action in extinguisher
C It leads to make the fire area to worse situation
D It will not make any harm in normal condition
Answer.
C. It leads to make the fire area to worse situation
Q.6 What will happen to the tenon saw, if grease is not applied, while not in use?
A Teeth will get blunt
B Cutting will not be straigh
C Nothing will happen, can be used as it is
D Rust will form on the top surface and teeth
Answer
D .Rust will form on the top surface and teeth
Q.7 What is the effect of electric shock with excessive level of current flow?
A Victim will get severe pain
B May loose consciousness and may lead to fatality
C May cause minor burns at the point of contact
D Cause one to loose his balance and fall
Answer.
B .May loose consciousness and may lead to fatality
अगर आपने ये सभी Question को अच्छे से पड़ लिया तो आप अब टेस्ट देने के लिए तैयार हो जाइये जिससे आपको पता लग जाएगा की आपने इन प्रश्नों को कितनी अच्छी तरह से पड़ा है | तो नीचे START बटन पर क्लिक करके आप टेस्ट दे सकते है |
आपके कितने नंबर आ रहे टेस्ट देने के बाद उसको comment करके जरूर बताये | जिससे हमे भी पता लगे की आपके कितने मार्क्स आ रहे |
CITS Electrician Theory Question Safety Practices Test Online
अगर आप Competitive Exams की तैयारी करते हो तो आपके लिए मै एक बुक को बताना चाहूँगा जिससे आपको काफी हेल्प होंगी Competitive Exams के लिए बुक्स (BOOK) को देखने के लिए यहाँ क्लिक करे Click Here
CITS ONLINE FORM FILL करने के लिए यहाँ क्लिक करे
